Lightweight, fun and performant, the Riot is your ideal companion for vol-biv missions, overseas travel or home-site playtime.
The Punk’s Lighter Twin
The Riot, is for fun-seeking rebels looking to lighten the load for the ultimate freedom of the skies. The straight-talking Riot tells you about the air, so you’re in control, while BGD handling, mid-B safety and high-B performance are the tools you need to be yourself and do your own thing. Break free, explore the skies and carve your own path. Have a Riot!
RIOT EN/LTF-B WALK ON THE WILD SIDE
- Around 20% lighter than our LTF/EN-B rebel
- Punk, the Riot is a fun-driven freedom-seeker of a wing.
- Under its vibrant chaos of wild pixel colours are some serious design features.
- Shark nose
- Cord Cut Billow
- Eyes Wide-Open safety
- Progressive Stability make the Riot a highperforming
informative glider with fun handling and great agility. We’ve also extended the weight ranges of most sizes, so you can load up, head off and explore the skies on long adventures
Eyes Wide-Open Safety
- Gliders that talk are safer. Safer gliders make pilots perform better. Better performing pilots fly further. Further flying pilots are happier pilots. Eyes Wide-open Safety produces happier pilots.
- The RIOT is designed to warn experienced pilots of light-to-moderate turbulence, rather than suddenly completely collapsing when things get really unruly. Bruce’s article in Cross Country magazine, ‘Shifting Our Thinking on Safety’, explains how “A wing that is super stable and almost never collapses can lead to more accidents, because when it does collapse the pilot is not prepared and has little experience of how to deal with the situation”. Any wing will collapse given enough turbulence. A small deflation in medium turbulence is easier to deal with and therefore safer than a big collapse in strong turbulence.
Cord Cut Billow (CCB)
- Cord Cut Billow technology has been developed to improve the form friction, glider stability and overall performance of our paragliders. Two seams run chord-wise across the top panels of the leading edge to accommodate the panel ballooning that happens when the wing is inflated. Up to five centimetres of excess material is created on the sides of an inflated flat panel bending over a wing profile. Cord Cut Billow technology absorbs the material with a 3D panel resulting in fewer ripples and improved rib profile shape and stability.
- Using our cutting edge software we have maintained the strength and rigidity of the profiles while maximizing the amount of non-load bearing material we could remove. This reduces weight and without increasing the cost or reducing the strength of the wing as a whole. Hole positioning and size is highly dependent on the loads taken locally by the sail and this can only be done correctly with recent innovations in our software.
Post C Band
- We have added a 'post C' band running along the top surface which seamlessly moves down to bottom surface at the tip connecting directly to the last line cascade. Instead of putting heavy plastic rods above the C lines we use this band to counter the common flip up ripple caused when adding a little brake. The problem with paragliders is when a little brake is applied the cupping of the trailing edge creates lift which often buckles the profile near the C’s. Using careful analysis during braking and it’s the interaction with our internal structure we have solved this problem with the “Post C Band” a eloquent, lightweight, clean, and volume reducing solution.
- We have added a 'big ears' A riser which is also on a ½ ratio with the rest of the A lines. This facilitates easy use of “big ears” while helping speed and stability while on bar. The speed system is light and simple without reflex really helping glide at speed.
Triple Finger Diagonals
- Across the whole chord of the profile we have designed three-piece diagonal supports that pass through the holes in other ribs. They ensure structural integrity by avoiding cloth bias from the ribs and creating a more solid wing even when brake is applied. This is particularly important near the trailing edge since the profile is thin and the diagonal ribs are shallow supporting higher loads.
Maximized Unsupported Cells
- Optimized unsupported cell groups are designed to match the span wise load distribution influenced by the line layout. Coupled with a strong internal structure the line layouts that create more span wise tension can support more unsupported cells. While maintaining a homogenous wing this helps to minimize line consumption reducing drag thus improving performance.
Strong Shark nose
- An ultra aggressive shark nose optimises stability at all speeds. Not all sharks are created equal and BGD’s shark noses are very aggressive, maximizing the effects of the technology.
- Snap Locks are lightweight compact attachments that effortlessly connect brakes to the risers with a small focused magnet inside the catch and an internal locking system that holds the handle in every direction except down toward the pilot. This unique design feature means the handles don’t fall off while kiting, packing, or performing manoeuvres. The Snap Lock system solves many of the problems associated with press-studs and magnets.
Optimized Line Layout
- Over the years we have perfected our system of optimizing the line layout of our wings. We use numerous equations, software, and the plain old guess and check method to build our line layout. The result is simple: fewer lines making stronger, faster gliders.
|Linear scaling factor||0.92||0.96||1.00||1.04||1.08|
|Total line length||204||224||243||262||282||m|
|Number of main lines||3/4/3||A/B/C|
|Flat aspect ratio||5.42|
|Projected aspect ratio||4.07|
|Ideal weight range||50-65||60-80||75-95||88-108||100-125||kg|
- BGD T-shirt
- Speed bar
- USB stick with manuals
- GD stickers
- Repair kit
- Stuff sack
- Riser bag
- Compression strap